Đồng hồ Richard Mille Yohan Blake RM 61-01
Bảo hành 2 năm quốc tế
Giá 6.214.600.000 VND
The RM 61-01 Yohan Blake takes all of its cues from the RM 59-01 tourbillon designed for the Olympic medallist and 2nd fastest man over 100m and 200m. It incorporates the calibre RMUL2, whose highly skeletonised grade 5 titanium movement is treated with PVD and Titalyt® to provide maximum performance.
Boasting a highly skeletonised calibre crafted of PVD-treated grade 5 titanium, The RM 61-01 ensures superlative performance thanks and impact resistance tested for impacts of over 5,000 g’s.
Skeletonised manual winding movement with hours, minutes and seconds.
Circa 55 hours (± 10%).
These components, crafted in grade 5 titanium with black PVD coating, confer great rigidity on the whole assembly, as well as the precise surface flatness essential for perfect functioning of the gear train.
Developed with sporting applications in mind, Richard Mille has consciously aimed for exceptional impact resistance with validation testing for the RM 61-01 carried out in excess of 5000 g’s.
This guarantees greater reliability when subjected to shock and during movement assembly or disassembly, hence better chronometric results over time.
The regulator index has been eliminated, guaranteeing a more accurate and repeatable calibration thanks to 4 small adjustable weights located directly on the balance.
DOUBLE-BARREL SYSTEM
The double-barrel system helps to improve torque stability over a longer period. This is achieved by distributing the stored energy across two winding barrels instead of one, which increases the number of rotations and reduces pressure on the teeth, bearings and pivots, resulting in better long-term performance.
MOVEMENT CHARACTERISTICS
Movement dimensions: 30.25 x 28.45 mm
Thickness: 3.15 mm
Number of jewels: 24
Barrel arbour: AP 20 steel
Balance: Glucydur®, 4 arms, moment of inertia 4.8 mg•cm2, angle of lift 53º
Frequency: 28,800 vph (4 Hz)
Balance spring: elinvar by Nivarox®
Shock protection: INCABLOC 908.22.211.100 (transparent)
Escapement wheel jewels: Rubifix (transparent)
ASYMETRICAL CASE
The bezel and the back of the RM 61-01 are created from black TZP ceramic. This ultra-tough ceramic material has a low density (6g/cm3) combining extreme resistance to scratches with a very low thermal conductivity coefficient. Composed of 95% zirconia (Zr02) stabilized with yttrium, TZP provides a perfect finish with blasted and hand-polished anglage in combination with a caseband created from light and highly resilient Carbon TPT®.
Its drawn-out shape between 2 and 5 o’clock prevents the crown from rubbing against the sprinter's wrist.
Accentuating the tough character of this timepiece are the large crown protectors, offering full security to the crown during sports and other activities.
The RM 61-01 case is water resistant to 50 metres. It is assembled with 20 spline screws in grade 5 titanium and abrasion-resistant washers in 316L stainless steel.
FINISHING
• Baseplate wet sandblasted grade 5 titanium, PVD treated and hand-drawn after treatment
• Hand-polished locking sections
• Burnished pivots
• Pinions with undercuts
• Screw slot and screws bevelled and polished with a rounded and polished tip
• Straight line grain finish of the upper surface
• Microblasted lower surfaces
• Hand-polished sinks
• Sandblasted and rhodium-plated, bevelled wheels (before cutting the teeth)
• Minimum corrections applied to the wheels in order to preserve geometry and performance
OTHER FEATURES
In Carbon TPT® with Alcryn® collar.
Bezel side: in sapphire (1,800 Vickers) with anti-glare coating (both sides).
Thickness: 1.50 mm
Case back: in sapphire with anti-glare coating (both sides).
Thickness: at the center 1.20 mm and outer edges 1.95 mm.
This permits better control of the torque applied to screws during assembly. These screws are therefore unaffected by physical manipulation during assembly or disassembly and age well.
24KARA - Công ty Phân phối và Thẩm định Đồng hồ chính hãng
24Kara là một thương hiệu uy tín chuyên cung cấp dịch vụ thu mua và phân phối đồng hồ cao cấp chính hãng. Với sứ mệnh mang đến những sản phẩm đồng hồ đẳng cấp và chất lượng, 24Kara không chỉ phân phối các dòng đồng hồ nổi tiếng như Rolex, Hublot, Omega, Longines mà còn cam kết dịch vụ thu mua đồng hồ cũ với giá trị hợp lý, giúp khách hàng dễ dàng chuyển nhượng hoặc tìm kiếm những mẫu đồng hồ yêu thích. Đội ngũ chuyên gia của 24Kara luôn sẵn sàng tư vấn và thẩm định giá trị đồng hồ chính xác, mang đến cho khách hàng những trải nghiệm mua sắm an tâm và đáng tin cậy. Chúng tôi tự hào là địa chỉ đáng tin cậy cho những tín đồ đam mê đồng hồ cao cấp tại Hồ Chí Minh và Hà Nội.
SĐT: 0778 529 999
Email: sales@24kara.com
MST: 0107423086
✪ Chi nhánh Hà Nội : 332 Bà Triệu, Phường Lê Đại Hành, Quận Hai Bà Trưng, Hà Nội.
✪ Chi nhánh Hồ Chí Minh: 132 Nguyễn Cư Trinh, Phường Nguyễn Cư Trinh, Quận 1, Hồ Chí Minh.
✪ Website: 24kara.com
✪ Instagram: www.instagram.com/24kara/
Copyright by Đồng Hồ 24Kara ® Since 2010
Góp ý & Khiếu nại: Sales@24kara.com
Website nhằm mục đích giới thiệu thông tin đến cộng đồng người chơi đồng hồ, không nhằm mục đích kinh doanh
Công ty TNHH Thương Mại Dịch Vụ và Sản Xuất 24KARA
Địa chỉ: Số 8 ngách 91 ngõ Trại Cá, Trương Định, Hai Bà Trưng, Hà Nội