Đồng hồ Richard Mille RM 017 Manual Winding Tourbillon Extra Flat
Bảo hành 5 năm quốc tế
Giá thị trường 12.022.200.000 VND
Giá 12.022.200.000 VND
The RM 017 Tourbillon is the first and only rectangular case shape in the tourbillon range, continuing the development of the rectangular case first launched with the RM 016.
Its profile is among the thinnest of the collection, representing a new visual incarnation suitable for all occasions with the same wrist-fitting curvature and taper typical of all Richard Mille creations.
When developing theautomatic RM 016, we were enthralled by the experiments led to conduct on how to deploy the mechanism horizontally. So we took it further by experimenting this on a tourbillon calibre.
Manual winding, extra-flat tourbillon movement with hours, minutes, power-reserve and function indicators.
Circa 70 hours
(± 10%).
The baseplate and the bridges are crafted of grade 5 titanium, a biocompatible, highly corrosion-resistant and remarkably rigid alloy, which enables the gear train to function effortlessly. The alloy is 90% grade 5 titanium, 6% aluminium and 4% vanadium. This combination further increases the material’s mechanical properties, which explains its frequent use in the aerospace, aeronautics and automobile industries.
The skeletonised baseplate and the bridges were subjected to intensive and complete validation tests to optimise their resistance capacities.
Indicated by a scale located on a scale at 2 o’clock, the power-reserve indicator shows the number of hours of energy left in the mainspring before the watch must be wound again.
FUNCTION INDICATOR
In a manner similar to a car’s gearbox, the function indicator identifies the winding, neutral and hand-setting positions as the crown is pulled out. A hand located at 4 o’clock indicates the current position.
FREE-SPRUNG BALANCE WITH VARIABLE INERTIA
The free-sprung balance offers better reliability in the event of shocks, movement assembly or disassembly, and also guarantees better chronometric results over an extended period.
FAST-ROTATING BARREL (6 HOURS PER REVOLUTION INSTEAD OF 7.5 HOURS)
This type of barrel provides the following advantages:
• The phenomenon of periodic internal mainspring adhesion is significantly diminished, thereby increasing performance.
• Provision of an excellent mainspring delta curve with an ideal power reserve/performance and regularity ratio.
SAFETY SYSTEM WITH BLOCKING GEAR
This system protects the roller jewel of the balance as well as the winding barrel from possible overwinding.
SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE BRIDGES AND CASE
This permits better control of the torque applied to screws during assembly. These screws are therefore unaffected by physical manipulation during assembly or disassembly and age well.
MOVEMENT CHARACTERISTICS
Movement dimensions: 31.20 x 29.45 mm
Thickness: 4.65 mm
Tourbillon diameter: 12.30 mm
Balance wheel diameter: 10.00 mm
Number of jewels: 23, set in white gold chatons
Balance: Glucydur®, 2 arms, 4 setting screws, moment of inertia 10 mg•cm2, angle of lift 53°
Frequency: 21,600 vph (3 Hz)
Balance spring: elinvar by Nivarox®
Shock protection: KIF Elastor KE 160 B28
Barrel shaft: nickel-free Chronifer® (DIN x 46 Cr 13 + S) with the following characteristics: stainless – antimagnetic – suitable for tempering
CASE
The RM 017’s sleek lines bear witness to Richard Mille’s extreme attention to the smallest details, reflecting an entire world of mechanical perfection.
The case exemplifies an uncompromising approach, with numerous stamping and machining operations required for the three main components (front bezel, back bezel and caseband). More than 18 days of machine adjustment are required as are more than 400 hours of technical research and drawing even before production can begin. Each case involves 202 separate machining operations. The case of the RM 017 requires 39 swaging operations, 16 striking and 270 milling operations. Machining lasts 4 hours and 15 minutes. To complete the finishing work, an entire day is devoted to grinding, glazing and polishing each watch.
The tripartite case is water resistant to 30 metres, ensured by two Nitrile O-ring seals. The case is assembled with 12 spline screws in grade 5 titanium and abrasion-resistant washers in 316L stainless steel.
TORQUE-LIMITING CROWN
This additional security system prevents accidental overwinding, which could cause damage to the winding stem or put excessive pressure on the barrel spring.
FINISHING
• Anglage and polishing by hand
• Hand-polished locking sections
• Sapphire-blasted milled sections
• Lapped and polished contact points
• Burnished pivots
• Sapphire-blasted surfaces
• Anglage and polishing by hand
• Burnished sections
• Satin-finished surfaces
• Concave chamfering with a diamond tool
• Circular-finished faces
• Rhodium plating (before cutting the teeth)
• Minimal corrections applied to the wheels in order to preserve geometry and performance.
OTHER FEATURES
This device permits an appreciable winding gain (circa 20%), especially during the start of winding. It is also helpful in evenly distributing the mainspring’s internal tension.
The central involute profile of the winding-barrel teeth and pinion provides an optimal pressure angle of 20°. This promotes effective rotary motion and compensates for possible variations in the engagement of the going train, thus ensuring excellent torque transmission with a distinct improvement in performance.
This reflects a technical and long-term view towards reducing the phenomenon of wear, resulting in improved technical tribology.
24KARA - Công ty Phân phối và Thẩm định Đồng hồ chính hãng
24Kara là một thương hiệu uy tín chuyên cung cấp dịch vụ thu mua và phân phối đồng hồ cao cấp chính hãng. Với sứ mệnh mang đến những sản phẩm đồng hồ đẳng cấp và chất lượng, 24Kara không chỉ phân phối các dòng đồng hồ nổi tiếng như Rolex, Hublot, Omega, Longines mà còn cam kết dịch vụ thu mua đồng hồ cũ với giá trị hợp lý, giúp khách hàng dễ dàng chuyển nhượng hoặc tìm kiếm những mẫu đồng hồ yêu thích. Đội ngũ chuyên gia của 24Kara luôn sẵn sàng tư vấn và thẩm định giá trị đồng hồ chính xác, mang đến cho khách hàng những trải nghiệm mua sắm an tâm và đáng tin cậy. Chúng tôi tự hào là địa chỉ đáng tin cậy cho những tín đồ đam mê đồng hồ cao cấp tại Hồ Chí Minh và Hà Nội.
SĐT: 0778 529 999
Email: sales@24kara.com
MST: 0107423086
✪ Chi nhánh Hà Nội : 332 Bà Triệu, Phường Lê Đại Hành, Quận Hai Bà Trưng, Hà Nội.
✪ Chi nhánh Hồ Chí Minh: 132 Nguyễn Cư Trinh, Phường Nguyễn Cư Trinh, Quận 1, Hồ Chí Minh.
✪ Website: 24kara.com
✪ Instagram: www.instagram.com/24kara/
Copyright by Đồng Hồ 24Kara ® Since 2010
Góp ý & Khiếu nại: Sales@24kara.com
Website nhằm mục đích giới thiệu thông tin đến cộng đồng người chơi đồng hồ, không nhằm mục đích kinh doanh
Công ty TNHH Thương Mại Dịch Vụ và Sản Xuất 24KARA
Địa chỉ: Số 8 ngách 91 ngõ Trại Cá, Trương Định, Hai Bà Trưng, Hà Nội